It's up to you, how to build ebike!

36V-52V 1000W-1500W 35A Sine Wave 3-mode Intelligent Controller for eBike Electric Bike
36V-52V 1000W-1500W 35A Sine Wave 3-mode Intelligent Controller for eBike Electric Bike
36V-52V 1000W-1500W 35A Sine Wave 3-mode Intelligent Controller for eBike Electric Bike
36V-52V 1000W-1500W 35A Sine Wave 3-mode Intelligent Controller for eBike Electric Bike

36V-52V 1000W-1500W 35A Sine Wave 3-mode Intelligent Controller for eBike Electric Bike

Preço normal
$99.00
Preço promocional
$66.00

36V-52V 1000W-1500W 35A Sine Wave 3-mode Intelligent Controller for eBike Electric Bike
 
 
Very important Notice:
This controller can only work without display or with our display, please never use it with your own display (because program is different)

Why 3-mode Controller?
Support Hall Sensor Mode (Sine Wave Mode)
Support Non-Hall Mode (If your motor hall sensor burned or not match, controller will still work in square wave mode)
Self-learning Function: Even wrong 3-phase combination between motor and controller, doesn’t matter, above self-learning process can correct it!


Parts Including:
15 MOSFET 35A 36V 48V, 52V Universal Voltage 1000W-1500W Intelligent 3-mode Sine Wave Controller
If you want a display, Please purchase through the link below

Advantage:
1. Sine Wave Controller which support 3-mode (hall sensor mode, non-hall mode, self-learning) and smart match with each motor through self-learning, works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control, give you best pedal experience
2. Universal Input Voltage Range: 36V/48V/52V
3. Work with or without display
4. Parameter setting via display
5. All protection make it long life and safe: over/under voltage, over current, over load, over heating, anti-runaway, locked-motor protection
6. Multi functions: Work with hall sensor mode or non-hall mode, smart match with different motor, 5-speed level for throttle and PAS, Speed limit, Reverse, Cruise, Push Assistant, Anti-thief, Regenerative Braking, Electric Braking and etc.
7. Best heat sinking with Aluminium Case
8. Black anodized Aluminium Controller Case against scratch
 
Technical Data:
General Specification:
1. Rated Power: 36V 650W/ 48V 860W/ 52V 930W
2. Peak Power: 36V 1200W/ 48V 1600W/ 52V 1800W
3. Brake: Low Voltage Brake
4. Alarm: Low Voltage Alarm
5. Rotor Position Detecting Method: Hall sensor
6. Size: 212x86.5x48.5mm
7. Net Weight: 610g
8. Waterproof Grade: IP65
 
FAQ:
1.  How shall I match my motor for first time use? (Very Important)
(Please check Controller Connection Diagram and Manual, Page 1)
1). Lift your motor wheel off ground (
very important)
2). Connect Self-learning plug 6-8 seconds
3). You will see motor wheel rotate slowly
4). Please check whether rotation direction is correct
(a). If correct direction, then keep 6-8 seconds, then disconnect
(b). If reverse direction, then disconnect and plug again till get correct rotation direction, then keep 6-8 seconds, then disconnect
5). Motor and Controller Pairing finished!


2. Can I use this controller without display?
Yes, you can use this controller without display, just need to connect jumper connector (Please check Controller Connection Diagram and Manual, Page 4, point No.3) 

 
Manual Download: Controller Connection Diagram and Manual Download